Trang chủ » Sản phẩm » GPRS/WCDMA (3G) RTU » F2764 TDD-LTE RTU

F2764 TDD-LTE RTU

Lượt xem: 0 Lượt xem

High-powered industrial cellular module

High-powered industrial 32 bits CPU

F2X64 industrial RTU support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest

Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function

Housing: iron, providing IP30 protection.

Power range: DC 5~35V

Từ khóa:
Chia sẻ:

F2X64 industrial RTU is wireless remote terminal unit(abbreviation:RTU). RTU has many functions (analog input、switch input、switch output、pulse counting and wireless data communication ect).

It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.

It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

Design for Industrial Application

  • High-powered industrial cellular module
  • High-powered industrial 32 bits CPU
  • F2X64 Industrial RTU support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
  • Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function
  • Housing: iron, providing IP30 protection.
  • Power range: DC 5~35V

Stability and Reliability

  • F2X64 Industrial RTU support hardware and software WDT
  • Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
  • RS232/RS485/RS422 port: 15KV ESD protection
  • SIM/UIM port: 15KV ESD protection
  • Power port: reverse-voltage and overvoltage protection
  • Antenna port: lightning protection(optional)

Standard and Convenience

  • Adopt terminal block interface, convenient for industrial application
  • Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly
  • TTL logic level RS232 interface can be customized
  • Support intellectual mode, enter into communication state automatically when powered
  • Provide management software for remote management
  • F2X64 Industrial RTU support several work modes
  • Convenient configuration and maintenance interface

High-performance

  • 8 ch acquisition analog input(resolution:16bit)Input voltage(0-5V),Input current(0-20mA), Sampling rate(1.365kSPS),Accuracy ±0.5% or better
  • 4 ch relay output(5A/30VDC,5A/250VAC)
  • 4 ch optocoupler isolation output,open collector to 30V,40mA max.load,power consumption 125mW
  • 8 ch Digital input(“0”:0-3.3V,“1”:5-24V) Contains all the way count function (1KHz)
  • 2MB SPI FLASH
  • F2X64 Industrial RTU support double data centers, one main and another backup
  • Support multi data centers and it can support 5 data centers at the same time
  • Support multi-center multi-function(for example: a data center is MODBUS RTU protocol function, another data center is RTU extended protocol function)
  • Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
  • Support dynamic domain name(DDNS) and IP access to data center
  • Support RS232/RS485 MODBUS RTU protocol.
  • Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to virtual serial
  • Support the function that 8-way digital input and 8-wat analog input(analog input are actual data, it means that customers do not need to be translated) are queried by MODBUS RTU protocol.
  • Support the function that 4-channel optocoupler output and 4-channel relay output are controlled by MODBUS RTU protocol
  • Support the function that the initial value of the timer is set and the value of the timer is queried by MODBUS RTU protocol
  • Support RTU extended protocol. Unified protocol format that customers develop easy
  • Support RTU extended protocol. Acquisition data(8-channel analog input and 8-channel digital input) are reported periodically
  • Support RTU extended protocol. Reporting mode can be selected. there are three reporting mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when network connect fail)
  • Support RTU extended protocol.When reporting acquisition data failure, acquisition data are saved to 2M byte SPI FALSH that power-down can save a lot of acquisition data
  • Support RTU extended protocol. The data center can query acquisition data actively
  • Support RTU extended protocol. It has counter function that the initial value of the timer is set and the value of the timer is queried
  • Support RTU extended protocol. It has the data center and RS232/RS485 transparent transmission function
  • Support RTU extended protocol. it has alarm function that alarm information is reported(alarm trigger conditions can be set independently).
  • Support RTU extended protocol. Can remotely reboot equipment
  • Support RTU extended protocol. Can remotely configure the parameters
  • Support RTU extended protocol. The remote upgrading parameters can be set, as well as rtu is remotely upgrading
  • Alarm function. Alarm information are reported through RTU extended protocol only, SMS only and both SMS and RTU extended protocol
  • When alarm information are reported through SMS, alarm number and alarm content of each channel can be set independently
  • The remote upgrading parameters can be set by SMS. RTU are remodely upgrading, when SMS set remote upgrading parameters successfully.
  • SMS remotely config parameters
  • Built-in industrial clock, the acquisition time can be recorded through this clock
  • Network is automatically conneted, when device power on. Network is automatically reconnected, when network is not conneted successfully.
  • The function of regular boot and shutdown make the device work in low-power model
Item Content
F2164 GPS RTU
Standard and Band EGSM 900/GSM 1800MHz, GSM 850/900/1800/1900MHz(optional)
Compliant to GSM phase 2/2+
GPRS class 10, class 12(optional)
Bandwidth 85.6Kbps
TX power GSM850/900:<33dBm
GSM1800/1900:<30dBm
RX sensitivity <-107dBm
F2264 CDMA RTU
Standard and Band CDMA2000 1xRTT 800MHz, 450MHz(optional)
Bandwidth 153.6Kbps
TX power <30dBm
RX sensitivity <-104dBm
F2464 WCDMA RTU
Standard and Band UMTS/WCDMA/HSDPA/HSUPA/HSPA+ 850/1900/2100MHz, 850/900/1900/2100MHz(optional)
GSM 850/900/1800/1900MHz
GPRS/EDGE CLASS 12
Bandwidth DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps
HSPA+: Download speed 21Mbps, Upload speed 5.76Mbps
HSDPA: Download speed 7.2Mbps, HSUPA: Upload speed 5.76Mbps
UMTS: 384Kbps
TX power <24dBm
RX sensitivity <-109dBm
F2664 EVDO RTU
Standard and Band CDMA2000 1X EVDO Rev A 800MHz, 800/1900MHz(optional), 450MHz(optional)
CDMA2000 1X EVDO Rev B 800/1900MHz(optional)
CDMA2000 1X RTT, IS-95 A/B
Bandwidth EVDO Rev. A: Download speed 3.1Mbps, Upload speed 1.8Mbps
EVDO Rev. B: Download speed 14.7Mbps, Upload speed 5.4Mbps (optional)
TX power <23dBm
RX sensitivity <-104dBm
F2764 TDD-LTE RTU
Standard and Band LTE TDD 2600/1900/2300MHz(Band 38/39/40), 800/1400/1800MHz(Band 27/61/62)(optional)
TD-SCDMA 2010/1900MHz(A/F frequency band, Band 34/39)
GSM /GPRS/EDGE 900/1800/1900MHz
Bandwidth LTE TDD: Download speed 61Mbps, Upload speed 18Mbps
TD-HSPA+: Download speed 4.2Mbps, Upload speed 2.2Mbps
TD-HSPA: Download speed 2.2Mbps, Upload speed 2.2Mbps
TX power <23dBm
RX sensitivity <-97dBm
F2864 FDD-LTE RTU
Standard and Band LTE FDD 2600/2100/1800/900/800MHz, 700/1700/2100MHz(optional)
DC-HSPA+/HSPA+/HSDPA/HSUPA/UMTS 850/900/2100MHz, 800/850/1900/2100MHz(optional)
EDGE/GPRS/GSM 850/900/1800/1900MHz
GPRS CLASS 10
GPRS CLASS 12
Bandwidth LTE FDD: Download speed 100Mbps, Upload speed 50Mbps
DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps
HSPA+: Download speed 21Mbps, Upload speed 5.76Mbps
HSDPA: Download speed 7.2Mbps, HSUPA: Upload speed 5.76Mbps
UMTS: 384Kbps
TX power <23dBm
RX sensitivity <-93.3dBm
F2A64 LTE RTU
Standard and Band LTE FDD,LTE TDD,EVDO,WCDMA,TD-SCDMA,CDMA1X,GPRS/EDGE
Bandwidth LTE FDD: Download speed 100Mbps, Upload speed 50Mbps
LTE TDD: Download speed 61Mbps, Upload speed 18Mbps
DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps
TD-HSPA+: Download speed 4.2Mbps, Upload speed 2.2Mbps
EVDO Rev. A: Download speed 3.1Mbps, Upload speed 1.8Mbps
TX power <23dBm
RX sensitivity <-93.3dBm

Hardware System

Item Content
CPU Industrial 32 bits CPU
FLASH 2MB(Extendable 8MB)
SRAM 512KB(Extendable 1MB)

Interface Type

Item Content
Serial 1 RS232 port and 1 RS485 port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
Indicator “Power”, “ACT”, “Online”
Antenna Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Terminal block interface, reverse-voltage and overcurrent protection

Power Input

Item Content
Standard Power DC 12V/0.5A
Power Range DC 5~35V

Power Consumption

Working States Power Consumption
Communication 88-100mA@12VDC
Standby 52mA@12VDC
Timing Power Off 0.9mA@12VDC

Physical Characteristics

Item Content
Housing Iron, providing IP30 protection
Dimensions 157x97x25 mm
Weight 500g

Environmental Limits

Item Content
Operating Temperature -35~+75ºC(-31~+167℉)
Storage Temperature -40~+85ºC(-40~+185℉)
Operating Humidity 95% ( unfreezing)

Ordering Information

Model No. Description
F2164 GPRS RTU
F2264 CDMA RTU
F2464 WCDMA RTU
F2664 EVDO RTU
F2764 TDD-LTE RTU
F2864 FDD-LTE RTU
F2A64 LTE RTU